635 DIN

635 DIN


  • DIN rail fitting
  • Wide range of voltages
  • Screw terminals
  • No reset

Have questions or need an offer?

We will be pleased to help you.

  • Hengstler GmbH
    Uhlandstr. 49
    78554 Aldingen
  • Tel. +49 / 7424 - 89 -0
  • Support request
Product Family635 DIN
FunctionTotalizing counter
TechnologyElectromechanical
Digits
  • 6-digit
  • 7-digit
Display
  • 6-digit
  • 7-digit
Presetnone
Digit Height [mm]4 mm (0.2 in), visual
Voltage
  • 5 VDC
  • 24-230 VAC/DC
Resetwithout reset
Duty Cycle at 25 °C100 %
Power Consumption
  • at 5 VDC: 80 mW
  • at 12 VDC: 200 mW
  • at 24 VDC: 400 mW
  • at 24 VAC: 85 mW
  • at 115 VAC / VDC: 350 mW
  • at 230 VAC / VDC: 665 mW
Cable Cross-Sectionmax. 2.5 mm2 (0.0039 in2)
Pulse Length min.50 ms
Residual Ripple [%]DC mode: 48 %
Supply Voltage
  • 5, 12 and 24 VDC
  • 24 VAC
  • 115/230 VDC / VAC
Count Frequency [Hz]10 Hz
Count Inputadding
Pulse Duty Factor Count Impulse1:1
Electrical ConnectionScrew terminals max. 2.5 mm2 (0.0039 in2)
Maintenance-Free operation10? pulses
IP Protection ClassIP 10
Operating Temperature [°C]?- 10 ...? + 50 °C (+ 14 ... 122 °F)
Storage Temperature [°C]?- 40 ...? + 85 °C (+ 14 ... 122 °F)
Degree of ProtectionIP 10
General DesignEN 61 010-1 / IEC 61010-1
Vibration Resistance50 m/s2 (164 ft/s2) (10 .
Shock Resistance2000 m/s2 (6561 ft/s2) (6 ms) acc. IEC 068-2-27
Protection ClassII, EN 61010-1 / IEC 61010-1
Contamination Level
  • V 2
  • EN 50178
Size [mm]69x26x28
Mounting OptionsDIN-rail attachment
MountingDIN-rail attachment
Resetwithout reset
Weight [g]approx. 40 g (3.2 oz)
Mounting Positionhorizontal rolling axis
Type 635 DIN electromechanical totalizing counter has a 6-digit optical display and is equipped with DIN rail fitting. The device can operate across a broad range of voltage, which enables it to run on 5, 12 and 24 volts DC and 115 or 230 volts AC. The counter is connected up using screw terminals.
汤姆叔叔官网-汤姆在线